Nutella Riscaldato Hot donut filler (with injector) - Suitable for 3Kg Ferrero Nutella buckets
Technical data:
- Dimensions: H=420 mm, W=290 mm, D=165 mm
- Weight: 3,4 kg
- Filling portions adjustable from 12 to 20 grammes
- Material: stainless steel
- The holder is supplied with 2 lockable clips.
- Heating element is 150 Watt suitable for 100-240 voltage.
- The temperature is limited to 60°C.
- Equipped with an on/off switch.
- The diameter is Ø 95 mm.
- Cord length: 130 cm.
- The holder is supplied with rubber feet.
Bucket in ‘cold’ condition (room temperature): approximately 25°C.
Ambient temperature: approximately 24°C.
When a full bucket is placed on the heating element and the lever-action dispenser is installed,
it takes about 30 minutes before the values below are reached.
At the top of the bucket: approximately 26°C.
At the bottom of the bucket to 10 cm above it: approximately 53°C.
So not the entire content will be heated.
After the Nutella has reached the temperature of ± 53°C and is pumped 2 or 3 times the temperature of the Nutella in the outlet pipe is about 38°C.
When not used, the temperature in the outlet pipe cools down to ± 27°C within 30 minutes, which does not cause any problems when warm Nutella will be pumped again.
Shipping costs need to be estimated: please ask us!