Retarder/Prover working table 2 doors -5/+40° C for 12 pans dim. 60x40 cm - dim. 1456x750x850H mm mod. BAKING TAB S FL 145
The Baking Tab retarder-proofer counter is a comprehensive work station that allows you to comfortably
prepare the dough on the Aisi 304 stainless steel worktop and then insert the product into the refrigerated
compartment below to start the leavening cycle.
The leavening takes place in a natural and homogeneous way respecting at the same time the baker’s needs,
in order to have products ready to be baked and offered to customers freshly made every day.
Aisi 304 stainless steel, internal / external.
Internal setup for Euronorm 60x40 trays and wireshelves.
Automatic defrost with electrical heater.
50 mm insulation thickness with environmentfriendly high-density polyurethane.
Alarm management (temperature, power failure and dirty condenser)
Automatic or manual working programs.
The monoblock refrigeration system connected to a ceiling ventilation channel located under the worktop
allows a uniform and homogeneous distribution of cold air.
Active humidity adjustment up to 95% Water supply connection needed.
Construction completely in stainless steel AISI 304
Inside with rounded corners and moulded bottom
50 mm insulation by environment-friendly polyurethane
Internal fitting for Euronorm 60x40 cm trays
Racks (43 mm pitch) and slideways in stainless steel
Air-cooled refrigeration with evaporators with anticorrosive treatment
Easily replaceable buffer cooling unit
ST class condensing unit (max +38°C)
R452A refrigerant gas (GWP 2141)
Control panel with 5-inches TFT touch-screen graphic display
Active humidity adjustment up to 95% (Fermalievita FL)
Automatic defrosting with heater cable
Automatic evaporation of condensate water with hot gas pipe
Serial port RS-485 for connection to supervision systems
Remote connection system via wifi (optional)
Self-closing door with stop at 105°
Easily replaceable magnetic gaskets
Adjustable in height (130-200 mm) stainless steel feet
Standard Equipment : nr 6 pairs of “L”-shaped stainless steel slideways per door
Technical data:
- Temperature: -5/+40° C - 55 ÷ 95%
- Voltage: 230V - 50 Hz
- Dimensions: 1456Wx750Wx850H mm
- Refrig. power: Evap. -10°C / Cond. 54,4°C 565 W
- Absorbed power: 1300 W / 7 A
- Gas: R452A
- Packing dimensions: 1516x810x1110H mm
- Net/gross weight: 140/149 Kg
- Construction completely in stainless steel AISI 304
- Inside with rounded corners and moulded bottom
- 50 mm insulation by environment-friendly polyurethane
- Internal fitting for Euronorm 60x40 cm trays
- Racks (43 mm pitch) and slideways in stainless steel
- Air-cooled refrigeration with evaporators with anticorrosive treatment
- Easily replaceable buffer cooling unit
- ST class condensing unit (max +38°C)
- R452A refrigerant gas (GWP 2141)
- Control panel with 5-inches TFT touch-screen graphic display
- Active humidity adjustment up to 95% (Fermalievita FL)
- Automatic defrosting with heater cable
- Automatic evaporation of condensate water with hot gas pipe
- Serial port RS-485 for connection to supervision systems
- Remote connection system via wifi (optional)
- Self-closing door with stop at 105°
- Easily replaceable magnetic gaskets
- Adjustable in height (130-200 mm) stainless steel feet
- Standard Equipment : nr 6 pairs of “L”-shaped stainless steel slideways per door
Accessories:
- Lampada UVC germicida
- Wheels
Shipping costs need to be estimated: please ask us!