Vacuum pack semiautomatic tray sealer in MAP and Skin-Pack vacuum packaging. Customizable mold. Suitable for 115 mm tray. Without sealing plate, molds or air compressor. 60m³/h vacuum pump.Up to 3 cycles per minute.
Suitable for trays with a maximum height of 115 mm
Maximal overskin height 20 mm
In stainless steel and on wheels
INCLUDED:
- Quick mould changing
- Automatic film waste collection
- Control Panel with 5 pre-set programs
- 3 volume reducers
- Storage gas tank for modified atmosphere packaging (MAP)
Preservation with MAP and Skin-Pack:
- Packing with MAP means keeping the original texture, properties and characteristics of a fresh food
- as long as possible, avoiding any chemical preservatives.
- As a first step, the air is completely sucked through the vacuuming process from the pack and then this same air is replaced with the right percentage of natural gas mixture.
- While, when we choose to Skin-Pack our product we do vacuum without adding any gas in our tray. With this process, a heated film enclosed the product tightly, vacuum is used to draw the film down onto the package creating a secure and attractive package. The Skin film fixes the contents of the pack and the complete sealing prevents any liquid in the product from escaping, like a second Skin.
Easy to use: The PLC user interface and the thermoregulator, simple and intuitive, are easily accessible during the whole packaging cycle. Moreover, they allows to modify, according to the selected trays, the sealing parameters such as time, sealing temperature, gas percentage (TVG series) and vacuum percentage.
Highest flexibility The semiautomatic tray sealer aims to flexibility and speed. Thanks to the quick mould change system (TVG series), indeed, the operator can comfortably change mould and sealing plate without using any tool. Everything done in total safety and in the shortest time possible.
Technical details:
Width (mm): 685
Depth (mm): 1150
Height (mm): 1500
Max. impression (mm): 350x275
Max. impression with profile cut (mm): 325x265
Max. height of the tray (mm): 115
Max. width roll (mm): 410
Max. ø roll (mm): 250
Vacuum pump (m³/h): 60
User interface: Control panel and PLC
Cycles / minute: 3
Storage gas tank (MAP): included
Automatic drawer: OPTIONAL
Quick mould changing: included
Automatic fim waste collection: included
Compressed air generator: Optional
Voltage: 230V 3~ - 400V 3N~
Power (KW): 2,8
Weight (kg): 260
Socket: 16 A (3P+N+T)
Electrical connection: Max. Voltage 8 A
Connection of gas inflow: Quick connection Ø 8 mm
Connection of air inflow: Quick connection Ø 6 mm
Input pressure: Min. 8 Bar - Max. 10 Bar
Power Cables: 1
Note minimum features required for compressed air generator
- Incoming pressure into tray sealer 6 bar
- Generation capacity 50 litres/min (effective)
- Storage air tank 6 litres
- Use only clean and dry air
- All the provided data are for a compressed air generator connected to 1 machine only. In case of additional connections these values change.